D’Addario PW-AG-15 Circuit Breaker Instrument Cable, Straight to Straight with Momentary Switch, 15ft

𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻𝘀:

The D’Addario Circuit Breaker instrument cable features an actuated “kill switch” that allows for noise-free instrument changes. Press the switch once to mute the signal to the amplifier completely. Press again to reactivate the signal flow. Available in latching or momentary switches in straight or right-angle plugs in a variety of lengths. Circuit Breaker cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. Solderless plugs ensure a solid connection and are easy to fix on the gig with a simple cutter and screwdriver. Two layers of shielding provide 100% coverage for superior insulation and noise rejection, making this the ultimate, high-performance cable.

 

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗦𝗽𝗲𝗰𝘀:

– Instrument Type: Guitar/Bass

 

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀:

– On/off switch for silent instrument changes available in momentary or latching

– Solderless cable assembly

– 24k gold plated plugs provide superior signal flow and corrosion resistance and 24awg oxygen-free copper conductors

– Available in right-angle and straight plugs

 

𝗔𝗱𝗱𝗶𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗲𝘁𝗮𝗶𝗹𝘀:

𝗠𝘆 𝗰𝗶𝗿𝗰𝘂𝗶𝘁 𝗯𝗿𝗲𝗮𝗸𝗲𝗿 𝗰𝗮𝗯𝗹𝗲 𝗵𝗮𝘀 𝗮𝗻 𝗶𝗻𝘁𝗲𝗿𝗺𝗶𝘁𝘁𝗲𝗻𝘁 𝘀𝗶𝗴𝗻𝗮𝗹. 𝗪𝗵𝗮𝘁 𝘀𝗵𝗼𝘂𝗹𝗱 𝗜 𝗱𝗼?

Please follow these steps, which may resolve your issue:

1. Make sure the screws on the plugs are completely screwed down.

2. Try unscrewing and removing the plugs.

3. With the plugs removed, use wire cutters or a razor blade and clip off an inch of cable on each end.

4. Insert the freshly cut cable into the plugs using a circular motion. Make sure the cable is inside the plug as far as it can go.

5. Completely tighten the screws to make contact with the center conductor.